Pipet Fillers
Devices that fill and empty pipets by suction and pressure to collect and dispense liquids; includes manually operated syringe-style fillers, motorized vacuum options, and accessories.
Pipet fillers or controllers help to more easily and rapidly fill and dispense liquids from pipets.
- Manual pipet fillers
- Application-specific bulbs for Westergren and other specific methods
- Plain and safety bulbs with vacuum, aspirate, and dispense valves
- Pipet pumps that offer one-handed operation
- Electronic pipet fillers
- Battery-operated and rechargeable for portability and flexibility
- Electrically powered for use in hoods or on benchtops
Pipette Supplies, Inc. PORTABLE PIPET AID BATTERY
Rechargeable replacement battery (NiMH, 9V, 250mAh) for Drummond Scientific Portable Pipet-Aid, Portable Pipet-Aid XP, Falcon Express Pipet-Aid, as well as the Integra Pipetboy acu instruments with serial numbers below ≤1350000.9V, NiMH Rechargeable. Formerly DR 4-000-035Please be advised that, for safety reasons, these batteries will not be fully charged when shipped. To ensure the battery will last a long time, please perform the following steps once battery is received.1. Charge the battery fully before using.2. Discharge the battery (down to 1.0V per cell) or until your device is running slow or dim. (When the device is slow or dim, do not discharge any further. This will damage the battery.)3. Repeat steps 1 & 2 four (4) times to condition the battery to reach full capacity.4. If you do not use the battery often, Pipette Supplies recommends recharging the battery at least once every two (2) months to maintain capacity.Made in China
Sigma Aldrich Fine Chemicals Biosciences Rf3000 Pipette Controller1EA
Powerful pump for quick and accurate measurements.The Rf3000 is an ergonomic lightweight pipette controller made of UV resistant material with adjustable valves and microprocessor control for consistent reliability and accuracy.The powerful pump offers rapid yet sensitive aspiration and dispensing. filling and dispensing speed is easily set with the same hand. Repeatedly press the large mode button and the bright LEDs will indicate one of three modes High Low or Gravity Mode (Gravity Mode to contain pipettes and dispense liquid without the motor).Additional features such as hand-neutral design for right- and left-handed users concave padded triggers and thumb controls ensures many hours of stress-free pipetting. The Rf3000 accommodates glass and plastic pipettes ranging in volume from 1 to 100 mL. The 0.45 A¬m nozzle filter prevents contamination and the 1mL nozzle adapter helps keep small pipettes stable.Long-life single Li-Ion battery allows approximately 20 hours of continuous
Sarstedt Inc PCR STRIP OF 8, UPTO 200UL, CS
PCR strip of 8, up to 200 µl, High Profile, PCR , 4 packs of 120 per case
Research Products International Corp Safety Pipette Filler, Natural Rubber, Red
Our safety pipette filler is made of 100% natural rubber for best chemical resistance. Air flow is controlled with polished glass ball valves that will not corrode or freeze up. Pipette fillers are easy to clean when necessary by repeated flushing. Colors are permanently molded into the rubber and will not fade or leach. Pipette fillers are easy to use. First expel air by squeezing valve A on the top of the bulb. Fill pipette by squeezing valve S on stem. To dispense from the pipette squeeze valve E on the side of the stem.
Chemglass Life Sciences Pipette Filler, Manual, Quick-Release, for up to 2mL, Blue
Designed for quick filling and releasing of liquid in aspirating and serological pipettes. Easy to use and easy to clean. Simply rotate the thumb wheel to aspirate or dispense accurate measurements. Press the release lever to quickly dispense all liquid from the pipettes. Resistant to acids and alkalies.
Alkali Scientific ProPette™ MPC, Manual Bulb/Squeeze Pipette Controller with Filter
ProPette™ MPC is the precise and easy to use manual pipette controller that ‘s always ready to use. After attaching a pipette, one squeeze of its large rubber filling bulb is all it takes to start pipetting – there are no wires, no tubing and no battery to recharge! Begin aspirating by touching the EZ-Flow lever which is designed to precisely control the filling speed, based on how gently or firmly you press the lever. A built-in replaceable filter ensures optimum flow rate and protects the controller from liquid penetration and over-fill. A separate button provides a positive blow-out function when required. Made to accept pipettes from 0.1 to 100mL, the silicone “chuck” adapter is flexible, completely autoclavable, and will accommodate all types of serological, “blow-out”, “to deliver,” glass and plastic pipettes with a soft, precise, air-tight seal. One per pack.
Bellco Glass, Inc. Electric Pipet Controller
Lightweight (6.3oz/170g) and designed to fit comfortably in either hand. Long-life rechargeable lithium battery provides up to 8 hours of cordless use on a 2 hour charge.\n\nSpecifications:\n
- \n
- Adjustable dial for speed setting \n
- Low pressure fingertip control buttons \n
- Easy fit adapter accepts pipet sizes from 1 to 100mL \n
CELLTREAT Scientific Products CELLTREAT SCIENTIFIC PRODUCTS LLC 3P
NC3973993 ALI-Q EDGE PIPET CONTROLLER